Convenience store HVAC and refrigeration monitoring built for stores that never close

Your rooftop units run around the clock, your walk-ins hold product worth more than the equipment, and your margins cannot absorb many emergency service calls. Elite Energy Management watches every rooftop unit and every walk-in cooler and freezer at every store and warns you days before a failure, without adding hardware or headcount.

Around-the-clock operations wear out HVAC faster and hide the warning signs

A convenience store rooftop unit gets no overnight rest. Constant door traffic, refrigeration heat rejection, and 24/7 runtime push equipment harder than almost any retail environment, and the failure that follows always seems to land on a holiday weekend.

24/7 runtime means faster wear

A unit that never shuts down accumulates compressor hours two to three times faster than one on a business-hours schedule. Belts loosen, capacitors weaken, and refrigerant charge drifts, all quietly, all while the store stays open.

Emergency calls hit thin margins hardest

A planned HVAC service call runs $200 to $400. An emergency after-hours call runs $800 to $1,500 or more. On convenience store margins, one avoidable emergency can erase a week of a store's profit.

HVAC and refrigeration fight each other

When the AC loses capacity, the store warms up and every cooler and walk-in works harder to compensate. One degrading rooftop unit quietly raises energy use across the whole store. Now both sides of that fight are on one screen.

Many stores, no central visibility

Whether you run 5 stores or 150, nothing tells you which units need attention this week. Store managers notice comfort, not equipment, and by then the problem is weeks old.

A warm walk-in is a food safety event

A walk-in cooler that loses a few degrees overnight puts product at risk by morning, and the first person to know is usually the opener. Compressor runtime and temperature hold tell the story hours earlier, if something is reading them.

Why your thermostat and EMS dashboard miss it

Thermostats report one thing: whether the space is at setpoint. A rooftop unit running flat out at 3am to hold temperature looks identical to a healthy unit on a basic dashboard. The gap between holding temperature and working normally is exactly where failures hide, and in a 24/7 store there is no off-hours period where problems become obvious.

  • A degrading unit holds setpoint for weeks while burning far more energy than it should. No alarm fires, because setpoint was never missed.
  • Overnight hours are where waste hides. Units running hard at 3am in a mild month are a warning sign nobody is awake to notice.
  • Store staff notice a warm store, not a struggling compressor. By the time someone complains, the problem has been building for two to six weeks.

What Elite Energy Management does differently

We connect to the thermostats, energy management system, and refrigeration controls your stores already have, collect readings from every rooftop unit and walk-in every 60 seconds, and let AI learn how each one behaves when it is healthy. When behavior drifts, you get a plain English warning with a recommended next step.

A health score for every unit at every store

Every rooftop unit and every walk-in cooler and freezer gets a 0 to 100 health score, updated nightly. Running well means it is fine. Monitoring means we are watching a developing trend. Action needed means schedule a service call. Sort your whole chain by health in one view.

Early warning, not a breakdown

Our AI models compare each unit against its own history, weather normalized so hot days do not trigger false alarms. Across technician-confirmed rooftop HVAC repairs, 87% were flagged before the technician arrived, with a median of 6 days advance warning.

Ask questions in plain English

The AI assistant answers questions like "which store is spending the most on HVAC this month" with specific numbers and a recommended next step, grounded in your live data.

Know what each store costs to cool

Set your utility rate per location and see what every unit costs per day, week, and month. Find the stores quietly burning energy and put a dollar figure on the waste.

Walk-in coolers and freezers, scored the same way

Each walk-in is compared against its own history: how long the compressor runs to hold temperature, how recovery looks after door traffic and defrost, and whether holds are getting harder. When a box starts working harder for the same result, you get a plain-English warning before product is at risk. See walk-in refrigeration monitoring.

Nine days of warning on a refrigerant leak

At a restaurant location we monitor, the platform flagged a dining unit drifting away from its healthy baseline. Nine days later, the technician's finding: five refrigerant leaks in the coil. Refrigerant loss is the classic slow killer in rooftop units, expensive in energy while it develops and expensive in hardware when it finishes. It is also exactly the kind of gradual decline a thermostat never reports and behavioral monitoring catches early.

9 days
Advance warning
5
Refrigerant leaks confirmed
87%
Of confirmed rooftop HVAC repairs flagged before the technician arrived

No new hardware. No installation visits.

We integrate with the equipment your locations already have, including eViewIoT, Pelican Wireless, Honeywell Resideo, ecobee, and Sensi. If you do not have an energy management system yet, we partner with eViewIoT to get you connected. Data starts flowing in hours, and the AI starts learning your equipment on day one.

  • Connect through your existing EMS or smart thermostats. Nothing to install on the roof, no store visits.
  • Monitoring is read only. We never take control of your equipment or change your setpoints.
  • Pricing starts at $5 per unit per month, and a walk-in is one unit at the same price. A typical store with 3 to 5 rooftop units and 2 walk-ins costs less per month than one hour of a technician's time.

Common questions from convenience store operators

In most cases, yes. We connect through your existing energy management system or smart thermostats, including eViewIoT, Pelican Wireless, Honeywell Resideo, ecobee, and Sensi. If your stores have no EMS at all, we partner with eViewIoT to get you connected.

Pricing starts at $5 per unit per month for rooftop units and walk-ins alike. A typical convenience store with 3 to 5 rooftop units and 2 walk-ins runs $25 to $35 per month. A single avoided emergency service call typically covers more than a year of monitoring for that store.

Yes. Walk-in coolers and freezers are monitored alongside your rooftop units, through the refrigeration controls already on site, with the same nightly health score and the same plain-English warnings.

There are no site visits and no hardware to install, so onboarding is measured in hours, not weeks. Once we connect to your EMS, every store on that system comes online together and the AI begins learning each unit's normal behavior immediately.

No. It makes your existing provider more effective. Instead of dispatching on complaints, you dispatch on data: which store, which unit, what the problem looks like, and how urgent it is.

See which stores and walk-ins need attention this week

Start a free 30 day pilot. No hardware, no commitment, and your first health scores within days of connecting.

Start free 30 day pilot